Content last revised on October 10, 2023
Brand: NEC
Model: P/N NL10276BC20-18BD
Diagonal Size: 10.4 inch
The diagonal size of the screen is 10.4 inches, measured from one corner to the opposite corner.
Panel Type: a-Si TFT-LCD, LCM
This indicates that the panel is an amorphous silicon thin-film transistor (a-Si TFT) LCD.
Resolution: 1024 (RGB) × 768, XGA
The panel has a resolution of 1024x768 pixels, which is known as XGA (Extended Graphics Array).
Pixel Format: RGB Vertical Stripe
The pixel arrangement on the panel is in a vertical stripe RGB format.
Active Area: 210.4(W) × 157.8(H) mm
The active area of the screen, where pixels are displayed, measures 210.4 mm in width and 157.8 mm in height.
Bezel Opening: 215.4(W) × 161.8(H) mm
The bezel opening is slightly larger than the active area and measures 215.4 mm in width and 161.8 mm in height.
Outline Size: 228(W) × 178.5(H) mm
The overall dimensions of the panel are 228 mm in width and 178.5 mm in height.
Brightness: 350 cd/m² (Typ.)
The typical brightness of the panel is 350 candela per square meter (cd/m²).
Viewing Angle: 80/80/80/80 (Typ.)(CR≥10) Left / Right / Up / Down
The viewing angles are specified as 80 degrees for both horizontal and vertical viewing, with a contrast ratio of at least 10.
Best View on: 6 o'clock
The best viewing orientation for the panel is at the 6 o'clock position.
Display Colors: 262K/16.7M 40% NTSC
The panel supports a color depth of 262,000 colors (262K) and can display 16.7 million colors (16.7M), covering 40% of the NTSC color gamut.
Frequency: 60Hz
Weight: 500g (Typ.)
The typical weight of the panel is 500 grams.
Surface Treatment: Anti Fingerprint + Antiglare, Hard coating (2H)
The screen has an anti-fingerprint and antiglare treatment, and it features a hard coating with a 2H hardness rating.
Contrast Ratio: 900:1 (Typ.) (TM)
The typical contrast ratio of the panel is 900:1.
Display Mode: TN, Normally White, Transmissive [Panelook copyright, copy is strictly prohibited]
The panel uses a Twisted Nematic (TN) technology, has a normally white mode, and is transmissive. Again, the copyright message suggests this information comes from Panelook.
Response Time: 3/15 (Typ.)(Tr/Td)
The response time of the panel is 3 milliseconds for the rise time (Tr) and 15 milliseconds for the fall time (Td), on average.
Lamp Type: 2 strings WLED, 70K hours, Optional
The panel uses White Light Emitting Diodes (WLEDs) with 2 strings of LEDs as its light source. The estimated lifespan is 70,000 hours, and it may be optional.
Touch Screen: PCAP, Air Bonding
The panel supports a PCAP (Projected Capacitive) touch panel with air bonding.
Application: Industrial
The panel is designed for industrial applications.
Signal Interface: LVDS (1 ch, 6/8-bit), 20 pins Connector
The panel uses LVDS (Low-Voltage Differential Signaling) with 1 channel and either 6-bit or 8-bit data transmission, connected via a 20-pin connector.
Input Voltage: 3.3V (Typ.)
The panel operates with a typical input voltage of 3.3 volts.
Environment:
Operating Temperature: -30 ~ 80 °C
Storage Temperature: -30 ~ 80 °C
Vibration Level: 2.0G (19.6 m/s²)
The panel is designed to operate within a wide temperature range of -30 to 80 degrees Celsius and can be stored at the same temperature range. It can withstand a vibration level of 2.0G.
