Content last revised on November 1, 2023
The model number P/NTM101VVGS01-00:
- Diagonal Size: 10.1 inches
- Panel Type: a-Si TFT-LCD assembly
- Resolution: 1200 x 1920 pixels, WUXGA, with a pixel format of RGB Vertical Stripe
- Active Area: 135.36 mm (width) x 216.576 mm (height)
- Bezel Opening: Not specified
- Outline Size: 159.9 mm (width) x 239 mm (height) x 5.7 mm (depth)
- Surface: Antiglare (Haze 10%), Hard coating (7H)
- Brightness: 300 cd/m² (Typical)
- Contrast Ratio: 1000:1 (Minimum)
- Viewing Angle: 80/80/80/80 (Typical) for left, right, up, and down directions, respectively, with a contrast ratio (CR) greater than or equal to 10
- Display Mode: Not specified
- Response Time: 25 milliseconds (Typical) for the total response time (Tr + Td)
- Display Colors: 16.7 million (8-bit), covering 70% of the NTSC color space
- Lamp Type: 8S4P WLED (White Light Emitting Diode), with a lifespan of 20,000 hours, and without a driver
- Frequency: Not specified
- Touch Screen: In-Cell Touch, connected via I²C interface
- Panel Weight: To Be Determined (TBD)
- Application: Pad & Tablet
- Signal Interface: MIPI (Mobile Industry Processor Interface), 4 data lanes, with a 45-pin connector
- Input Voltage: 1.8V (IOVCC), 3.3V (VCC) (Typical)
- Operating Environment: Operating Temperature: -10 to 60 °C; Storage Temperature: -20 to 70 °C
This panel is designed for use in pad and tablet devices. It features a high-resolution display with good contrast and a wide viewing angle. The in-cell touch technology allows for touch input without the need for an additional touch panel on top of the LCD. The panel operates with MIPI interface and requires both 1.8V (IOVCC) and 3.3V (VCC) input voltages. The operating temperature range is -10 to 60 °C, and the storage temperature range is -20 to 70 °C. The panel weight is not specified in the provided information.
