Sell TX18D205VM0BXA, #Hitachi #TX18D205VM0BXA Stock, TX18D205VM0BXA KOE 7 inch LCM 800×480 700 1000:1 85/85/85/85 262K WLED TTL, #LCD_Display, #LCD, #TX18D205VM0BXA
Email: sales@shunlongwei.com
URL:
https://www.slw-ele.com/tx18d205vm0bxa.html
- Diagonal Size: 7.0 inches
- This is the size of the display panel measured diagonally.
- Panel Type: a-Si TFT-LCD, LCM
- The display panel is of the a-Si (amorphous silicon) Thin-Film Transistor Liquid Crystal Display (TFT-LCD) type.
- Resolution: 800(RGB)×480, WVGA
- The panel has a resolution of 800 pixels in the horizontal (RGB) direction and 480 pixels in the vertical direction, making it a WVGA display.
- Pixel Format: RGB Vertical Stripe
- The arrangement of the pixels on the panel is in an RGB vertical stripe format.
- Active Area: 152.4(W)×91.44(H) mm
- This is the dimension of the screen's active area where images are displayed.
- Bezel Opening: 154.5(W)×93.54(H) mm
- The bezel opening represents the area of the frame around the active display area.
- Outline Dimensions: 170(W)×113.3(H)×22(D) mm
- Luminance: 700 cd/m² (Typ.)
- The typical brightness of the display is 700 nits (candelas per square meter).
- View Direction: Symmetry
- The display has a symmetric viewing angle.
- Viewing Angle: 85/85/85/85 (Typ.)(CR≥10) Left / Right / Up / Down
- The typical viewing angles for the display are 85 degrees in all directions (left, right, up, and down) with a contrast ratio of at least 10.
- Support Color: 262K (72% NTSC)
- The display supports 262,000 colors and covers approximately 72% of the NTSC color gamut.
- Weight: 290g (Typ.)
- The weight of the display panel is approximately 290 grams.
- Frame Rate: 60Hz
- The panel has a standard frame rate of 60Hz.
- Treatment: Hard coating (7H)
- The display panel has a hard coating with a hardness rating of 7H, which provides protection against scratches.
- Contrast Ratio: 1000:1 (Typ.)
- The typical contrast ratio of the display is 1000:1.
- Response Time: 30 (Typ.)(Tr+Td)
- The response time of the display is approximately 30 milliseconds, measured as the sum of the rise time (Tr) and fall time (Td).
- Operating Mode: IPS, Normally Black, Transmissive
- The display panel uses an In-Plane Switching (IPS) technology, is normally black in its unpowered state, and is transmissive.
- Light Source: WLED, 70K hours, With LED Driver
- The panel uses White Light Emitting Diodes (WLEDs) as the light source, with a rated lifetime of 70,000 hours. It includes an LED driver.
- Designed For: Automotive Display
- The display panel is designed for automotive display applications.
- Touch Panel: PCAP, I²C
- The display includes a projected capacitive touch panel with I²C interface.
- Interface Type: CMOS (1 ch, 6-bit), 40 pins Connector
- The display panel uses a CMOS interface with 1 channel and 6-bit data, and it connects via a 40-pin connector.
- Power Supply: 3.3V (Typ.)
- The typical power supply voltage for the display is 3.3 volts.
- Environment:
- Operating Temperature: -30 ~ 80 °C
- Storage Temperature: -40 ~ 90 °C
- Vibration Level: 5.0G (49.0 m/s²)
- The recommended operating temperature range for the display is from -30°C to 80°C, the storage temperature range is from -40°C to 90°C, and it can withstand vibration levels of up to 5.0G.