- Diagonal Size: 7.0 inches
- This is the size of the display panel measured diagonally.
 
 - Panel Type: a-Si TFT-LCD, LCM
- The display panel is of the a-Si (amorphous silicon) Thin-Film Transistor Liquid Crystal Display (TFT-LCD) type.
 
 - Resolution: 800(RGB)×480, WVGA
- The panel has a resolution of 800 pixels in the horizontal (RGB) direction and 480 pixels in the vertical direction, making it a WVGA display.
 
 - Pixel Format: RGB Vertical Stripe
- The arrangement of the pixels on the panel is in an RGB vertical stripe format.
 
 - Active Area: 152.4(W)×91.44(H) mm
- This is the dimension of the screen's active area where images are displayed.
 
 - Bezel Opening: 154.5(W)×93.54(H) mm
- The bezel opening represents the area of the frame around the active display area.
 
 - Outline Dimensions: 170(H)×112.5(V)×22(D) mm
- These are the physical dimensions of the entire display panel.
 
 - Treatment: Hard coating (7H)
- The display panel has a hard coating with a hardness rating of 7H, which provides protection against scratches.
 
 - Luminance: 700 cd/m² (Typ.)
- The typical brightness of the display is 700 nits (candelas per square meter).
 
 - Contrast Ratio: 1000:1 (Typ.)
- The typical contrast ratio of the display is 1000:1.
 
 - View Direction: Symmetry
- The display has a symmetric viewing angle.
 
 - Response Time: 30 (Typ.)(Tr+Td)
- The response time of the display is approximately 30 milliseconds, measured as the sum of the rise time (Tr) and fall time (Td).
 
 - Viewing Angle: 85/85/85/85 (Typ.)(CR≥10) Left / Right / Up / Down
- The typical viewing angles for the display are 85 degrees in all directions (left, right, up, and down) with a contrast ratio of at least 10.
 
 - Operating Mode: IPS, Normally Black, Transmissive
- The display panel uses an In-Plane Switching (IPS) technology, is normally black in its unpowered state, and is transmissive.
 
 - Support Color: 262K (72% NTSC)
- The display supports 262,000 colors and covers approximately 72% of the NTSC color gamut.
 
 - Light Source: WLED, 70K hours, With LED Driver
- The panel uses White Light Emitting Diodes (WLEDs) as the light source, with a rated lifetime of 70,000 hours. It includes an LED driver.
 
 - Weight: 290g (Typ.)
- The weight of the display panel is approximately 290 grams.
 
 - Designed For: Automotive Display
- The display panel is designed for automotive display applications.
 
 - Frame Rate: 60Hz (120Hz with Embedded MEMC Circuit)
- The panel has a standard frame rate of 60Hz, but it can achieve a frame rate of 120Hz when an embedded MEMC (Motion Estimation, Motion Compensation) circuit is used with a 60Hz input.
 
 - Touch Panel: PCAP, USB
- The display includes a projected capacitive touch panel with USB interface.
 
 - Interface Type: CMOS (1 ch, 6-bit), 40 pins Connector
- The display panel uses a CMOS interface with 1 channel and 6-bit data, and it connects via a 40-pin connector.
 
 - Power Supply: 3.3V (Typ.)
- The typical power supply voltage for the display is 3.3 volts.
 
 - Environment:
- Operating Temperature: -30 ~ 80 °C
 - Storage Temperature: -40 ~ 90 °C
 - Vibration Level: 5.0G (49.0 m/s²)
 - The recommended operating temperature range for the display is from -30°C to 80°C, the storage temperature range is from -40°C to 90°C, and it can withstand vibration levels of up to 5.0G.