Content last revised on September 3, 2023
- Diagonal Size: 7.0 inches
- This is the size of the display panel measured diagonally.
- Panel Type: a-Si TFT-LCD, LCM
- The display panel is of the a-Si (amorphous silicon) Thin-Film Transistor Liquid Crystal Display (TFT-LCD) type.
- Resolution: 1024(RGB)×768, XGA
- The panel has a resolution of 1024 pixels in the horizontal (RGB) direction and 768 pixels in the vertical direction, making it an XGA display.
- Pixel Format: RGB Vertical Stripe
- The arrangement of the pixels on the panel is in an RGB vertical stripe format.
- Active Area: 141.312(W)×105.984(H) mm
- This is the dimension of the screen's active area where images are displayed.
- Bezel Opening: 143.81(W)×108.48(H) mm
- The bezel opening represents the area of the frame around the active display area.
- Outline Dimensions: 151.5(H)×118.88(V)×5.25(D) mm
- These are the physical dimensions of the entire display panel.
- Luminance: 400 cd/m² (Typ.)
- The typical brightness of the display is 400 nits (candelas per square meter).
- Contrast Ratio: 800:1 (Typ.)
- The typical contrast ratio of the display is 800:1.
- View Direction: Symmetry
- The display has a symmetric viewing angle.
- Response Time: 30 (Typ.)(Tr+Td)
- The response time of the display is approximately 30 milliseconds, measured as the sum of the rise time (Tr) and fall time (Td).
- Viewing Angle: 80/80/80/80 (Typ.)(CR≥10) Left / Right / Up / Down
- The typical viewing angles for the display are 80 degrees in all directions (left, right, up, and down) with a contrast ratio of at least 10.
- Operating Mode: IPS, Normally Black, Transmissive
- The display panel uses an In-Plane Switching (IPS) technology, is normally black in its unpowered state, and is transmissive.
- Support Color: 16.7M (70% NTSC)
- The display supports 16.7 million colors and covers approximately 70% of the NTSC color gamut.
- Light Source: WLED [4S5P], W/O Driver
- The panel uses White Light Emitting Diodes (WLEDs) arranged in a 4 series 5 parallel configuration, and it doesn't require an external driver for the backlight.
- Weight: 100g (Typ.)
- The weight of the display panel is approximately 100 grams.
- Designed For: Industrial
- The display panel is designed for industrial applications.
- Frame Rate: 60Hz (120Hz with Embedded MEMC Circuit)
- The panel has a standard frame rate of 60Hz, but it can achieve a frame rate of 120Hz when an embedded MEMC (Motion Estimation, Motion Compensation) circuit is used with a 60Hz input.
- Touch Panel: Without
- The display does not include a touch panel.
- Interface Type: LVDS (1 ch, 8-bit) + SPI, 40 pins Connector
- The display panel uses a Low-Voltage Differential Signaling (LVDS) interface with 1 channel and 8-bit data, along with a Serial Peripheral Interface (SPI). It connects via a 40-pin connector.
- Power Supply: 3.3V (Typ.)
- The typical power supply voltage for the display is 3.3 volts.
- Environment:
- Operating Temperature: -10 ~ 60 °C
- Storage Temperature: -20 ~ 70 °C
- The recommended operating temperature range for the display is from -10°C to 60°C, and the storage temperature range is from -20°C to 70°C.
These specifications provide valuable information about the display panel's size, resolution, performance characteristics, and operating conditions, which are essential for selecting and integrating it into various industrial applications.
