Content last revised on September 13, 2023
Brand: KOE
Model: P/NTX20D33VM2BPA
Diagonal Size: 8.0 inches
Panel Type: a-Si TFT-LCD, LCM (Liquid Crystal Module)
Resolution: 800 (RGB) × 480, WVGA
Pixel Format: RGB Vertical Stripe
Active Area: 174 (W) × 104.4 (H) mm
Bezel Opening: Not specified
Outline Dimensions: 189 (W) × 120 (H) × 10 (D) mm
Treatment: Antiglare, Hard coating (3H)
Luminance: 320 cd/m² (Typical)
Contrast Ratio: 600:1 (Typical)
View Direction: 6 o'clock
Viewing Angle: 80/80/60/80 (Typical) - This represents the viewing angles in degrees (Left, Right, Up, Down) with a minimum contrast ratio of 10.
Support Color: 262K (60% NTSC)
Weight: 230g
Frame Rate:
60Hz (Standard)
120Hz (60Hz Input): Embedded MEMC (Motion Estimation, Motion Compensation) Circuit
120Hz + 120Hz: 120Hz Panel Refresh + 120Hz Backlight Refresh
240Hz (60HZ Input): Embedded MEMC Circuit
Operating Mode: TN (Twisted Nematic), Normally White, Transmissive
Light Source: WLED (White Light Emitting Diodes) [3S9P], 50K hours lifespan, Without Driver
Designed For: Industrial use
Touch Panel: 4-wire Resistive Touch
Interface Type: CMOS (Complementary Metal-Oxide-Semiconductor), 1 channel, 6-bit, 40 pins Connector
Power Supply: 3.3V (Typical)
Environment:
Operating Temperature: -20 ~ 70°C
Storage Temperature: -30 ~ 80°C
Vibration Level: 2.0G (19.6 m/s²)