Content last revised on November 5, 2023
- Brand: HITACHI
- Model: P/NTX26D02VM1CAA
- Diagonal Size: 10.4 inches
- Panel Type: a-Si TFT-LCD, LCM (amorphous Silicon Thin-Film Transistor Liquid Crystal Display, Liquid Crystal Module)
- Resolution: 640 (RGB) × 480, VGA
- Pixel Format: RGB Vertical Stripe
- Active Area: 211.2 (W) × 158.4 (H) mm
- Bezel Opening: 215.4 (W) × 162.6 (H) mm
- Outline Dimensions: 243 (H) × 181.6 (V) × 12.5 (D) mm
- Treatment: Antiglare, Hard coating (3H)
- Luminance: 350 cd/m² (Typ.) - This is the typical brightness of the display in candelas per square meter (cd/m²).
- Contrast Ratio: 500:1 (Typ.) - This is the typical contrast ratio of the display.
- Viewing Direction: Not specified
- Response Time: 30 ms (Typ.) (Tr) and 20 ms (Typ.) (Td) - These are the typical response times of the display for the rising and falling transitions, measured in milliseconds.
- Viewing Angle: 50/50/50/50 (Min.) (CR≥10) - Specifies the minimum viewing angles in degrees (left, right, up, and down) under specific contrast conditions.
- Operating Mode: TN (Twisted Nematic), Normally White, Transmissive - TN is a common type of LCD panel technology known for fast response times but more limited viewing angles.
- Support Color: 262,000 colors, 63% NTSC - Indicates the color capabilities of the display.
- Light Source: CCFL (Cold Cathode Fluorescent Lamp), 2 pieces, Without Driver - Specifies the type of backlight used and that it doesn't require a separate driver.
- Weight: 450 grams (Typ.) - This is the typical weight of the display.
- Designed For: Industrial - This display is designed for industrial applications.
- Frame Rate: 60Hz - This is the standard refresh rate of the display.
- Frame Rate Options:
- 120Hz (60Hz Input) with embedded MEMC Circuit
- 120Hz+120Hz with 120Hz Panel and 120Hz Backlight
- 240Hz (60Hz Input) with embedded MEMC Circuit
- Touch Panel: Without - This display does not have a touch panel feature.
- Interface Type: CMOS (Complementary Metal-Oxide-Semiconductor), 1 channel, 6-bit, 32 pins Connector - CMOS is an interface for connecting the display to the controller.
- Power Supply: 3.3V (Typ.) (VDD) - The typical voltage required to power the display.
- Operating Environment:
- Operating Temperature: -20 to 70 °C - The recommended temperature range for the display to operate.
- Storage Temperature: -20 to 70 °C - The recommended temperature range for storing the display.
- Vibration Level: 3.0G (29.4 m/s²) - Specifies the level of vibration the display can withstand.