Content last revised on November 5, 2023
- Brand: HITACHI
- Model: P/NTX26D12VM0APA
- Diagonal Size: 10.4 inches
- Panel Type: a-Si TFT-LCD, LCM (amorphous Silicon Thin-Film Transistor Liquid Crystal Display, Liquid Crystal Module)
- Resolution: 800 (RGB) × 600, SVGA
- Pixel Format: RGB Vertical Stripe
- Active Area: 211.2 (W) × 158.4 (H) mm
- Bezel Opening: 215.8 (W) × 163.0 (H) mm
- Outline Dimensions: 243 (W) × 185.1 (H) × 13 (D) mm
- Surface: Antiglare - The display surface has an antiglare treatment, which reduces reflections and glare.
- Brightness: 360 cd/m² (Typ.) - This is the typical brightness of the display in candelas per square meter (cd/m²).
- Contrast Ratio: 800:1 (Typ.) - This is the typical contrast ratio of the display.
- Viewing Angle: 85/85/85/85 (Typ.) (CR≥10) - Specifies the viewing angles in degrees (left, right, up, and down) under specific contrast conditions.
- Display Mode: IPS (In-Plane Switching), Normally Black, Transmissive - IPS is known for its wide viewing angles and color accuracy.
- Best View on: Symmetry - This is the recommended viewing orientation.
- Response Time: 25 ms (Typ.) (Tr+Td) - This is the typical response time of the display, measured in milliseconds.
- Display Colors: 262,000 colors/16.7 million colors, 54% NTSC - Indicates the color capabilities of the display.
- Lamp Type: 3S8P WLED (White Light Emitting Diode), 70,000 hours, With LED Driver - Specifies the type of backlight used and its lifespan.
- Frequency: 60Hz - This is the standard refresh rate of the display.
- Touch Screen: 4-wire Resistive Touch - This display has a 4-wire resistive touch panel.
- Panel Weight: 750 grams (Typ.) - This is the typical weight of the display.
- Application: Industrial Medical Imaging - This display is designed for industrial medical imaging applications.
- Signal Interface: LVDS (Low Voltage Differential Signaling), 1 channel, 6/8-bit, 20 pins Connector - LVDS is a common interface for connecting LCD panels to display controllers.
- Input Voltage: 3.3V (Typ.) - The typical voltage required to power the display.
- Operating Environment:
- Operating Temperature: -20 to 70 °C - The recommended temperature range for the display to operate.
- Storage Temperature: -30 to 80 °C - The recommended temperature range for storing the display.
- Vibration Level: 2.0G (19.6 m/s²) - Specifies the level of vibration the display can withstand.