Content last revised on November 5, 2023
The HITACHI display panel with model P/NTX26D19VM2BAA:
- Brand: HITACHI
- Model: P/NTX26D19VM2BAA
- Diagonal Size: 10.4 inches
- Panel Type: a-Si TFT-LCD, LCM (amorphous Silicon Thin-Film Transistor Liquid Crystal Display, Liquid Crystal Module)
- Resolution: 800 (RGB) × 600, SVGA
- Pixel Format: RGB Vertical Stripe
- Active Area: 211.2 (W) × 158.4 (H) mm
- Bezel Opening: 214.2 (W) × 161.4 (H) mm
- Outline Dimensions: 243 (W) × 185.1 (H) × 10 (D) mm
- Brightness: 550 cd/m² (Typ.) - This is the typical brightness of the display in candelas per square meter (cd/m²).
- Viewing Angle: 80/80/50/80 (Typ.) (CR≥10) - Specifies the viewing angles in degrees (left, right, up, and down) under specific contrast conditions.
- Best View: 6 o'clock - This is the recommended viewing orientation.
- Display Colors: 16.7 million colors, 50% NTSC - Indicates the color capabilities of the display.
- Frequency: 60Hz - This is the standard refresh rate of the display.
- Weight: 360 grams (Typ.) - This is the typical weight of the display.
- Surface: (Not provided)
- Contrast Ratio: 800:1 (Typ.) - This is the typical contrast ratio of the display.
- Display Mode: TN (Twisted Nematic), Normally White, Transmissive - TN is a common type of LCD panel technology known for fast response times but more limited viewing angles.
- Response Time: 20 ms (Typ.) - This is the typical response time of the display, measured in milliseconds.
- Lamp Type: 3S24P WLED (White Light Emitting Diode), 50,000 hours, Without Driver - Specifies the type of backlight used and its lifespan.
- Touch Screen: Without - This display does not have a touch screen feature.
- Application: Industrial - This display is designed for industrial applications.
- Signal Interface: LVDS (Low Voltage Differential Signaling), 1 channel, 8-bit, 20 pins Connector - LVDS is a common interface for connecting LCD panels to display controllers.
- Input Voltage: 3.3V (Typ.) - The typical voltage required to power the display.
- Operating Environment:
- Operating Temperature: -20 to 70 °C - The recommended temperature range for the display to operate.
- Storage Temperature: -30 to 80 °C - The recommended temperature range for storing the display.
- Vibration Level: 2.0G (19.6 m/s²) - Specifies the level of vibration the display can withstand.