Content last revised on November 5, 2023
- Brand: HITACHI
- Model: P/NTX26D50VM0BAA
- Diagonal Size: 10.4 inches
- Panel Type: a-Si TFT-LCD, LCM (amorphous Silicon Thin-Film Transistor Liquid Crystal Display, Liquid Crystal Module)
- Resolution: 800 (RGB) × 600, SVGA
- Pixel Format: RGB Vertical Stripe
- Active Area: 211.2 (W) × 158.4 (H) mm
- Bezel Opening: 215.8 (W) × 163.0 (H) mm
- Outline Dimensions: 243 (H) × 185.1 (V) × 11 (D) mm
- Treatment: Not specified
- Luminance: 450 cd/m² (Typ.) - This is the typical brightness of the display in candelas per square meter (cd/m²).
- Contrast Ratio: 800:1 (Typ.) - This is the typical contrast ratio of the display.
- Viewing Direction: Symmetry
- Response Time: 25 ms (Typ.) (Tr+Td) - This is the typical response time of the display, measured in milliseconds.
- Viewing Angle: 85/85/85/85 (Typ.) (CR≥10) - Specifies the viewing angles in degrees (left, right, up, and down) under specific contrast conditions.
- Operating Mode: IPS (In-Plane Switching), Normally Black, Transmissive - IPS is a type of LCD panel technology known for its wide viewing angles and accurate color reproduction.
- IPS Family Options: AAS, ADS, AHVA, FFS, HIS, IPS, New Mode2, PLS, SFT, Vistarich
- VA Family Options: ASV, FSA, HVA, MVA, PVA, SVA, UV²A, VA
- Support Color: 16.7 million colors, 54% NTSC - Indicates the color capabilities of the display.
- Light Source: WLED (White Light Emitting Diode), [3S8P], 70,000 hours, With LED Driver - Specifies the type of backlight used and its lifespan.
- Weight: 560 grams (Typ.) - This is the typical weight of the display.
- Designed For: Medical Imaging - This display is designed for medical imaging applications.
- Frame Rate: 60Hz - This is the standard refresh rate of the display.
- Frame Rate Options:
- 120Hz (60Hz Input) with embedded MEMC Circuit
- 120Hz+120Hz with 120Hz Panel and 120Hz Backlight
- 240Hz (60Hz Input) with embedded MEMC Circuit
- Touch Panel: Without - This display does not have a touch panel feature.
- Interface Type: CMOS (Complementary Metal-Oxide-Semiconductor), 1 channel, 8-bit, 40 pins Connector - CMOS is an interface for connecting the display to the controller.
- Power Supply: 3.3V (Typ.) - The typical voltage required to power the display.
- Operating Environment:
- Operating Temperature: -20 to 70 °C - The recommended temperature range for the display to operate.
- Storage Temperature: -30 to 80 °C - The recommended temperature range for storing the display.
- Vibration Level: 2.0G (19.6 m/s²) - Specifies the level of vibration the display can withstand.