The model number P/NTM101DVHG01-60:
- Diagonal Size: 10.1 inches
- Panel Type: a-Si TFT-LCD (active matrix thin-film transistor liquid crystal display)
- Resolution: 1024 x 600 pixels, WSVGA, with a pixel format of RGB Vertical Stripe
- Active Area: 222.72 mm (width) x 125.28 mm (height)
- Bezel Opening: Not specified
- Outline Dimensions: 236.4 mm (width) x 147.89 mm (height) x 7.75 mm (depth)
- Treatment: Hard coating (6H)
- Luminance: 360 cd/m² (Typical)
- Contrast Ratio: 800:1 (Typical)
- Viewing Angle: 80/80/75/80 (Typical) for left, right, up, and down directions, respectively, with a contrast ratio (CR) greater than or equal to 10
- Operating Mode: TN (Twisted Nematic), Normally White, Transmissive
- Response Time: 7 milliseconds (Typical) for the total response time (Tr + Td)
- Support Color: 262,000 (6-bit) or 16.7 million (8-bit), covering 47% of the NTSC color space
- Light Source: WLED (White Light Emitting Diode), with a lifespan of 30,000 hours, and equipped with an LED driver
- Weight: 358 grams (Typical)
- Designed For: Industrial applications
- Frame Rate: 60Hz, with support for 120Hz (60Hz input) via an embedded MEMC (Motion Estimation/Motion Compensation) circuit and 240Hz (60Hz input) via an embedded MEMC circuit
- Touch Panel: PCAP (Projected Capacitive Touch Panel), connected via I²C interface
- Interface Type: LVDS (Low Voltage Differential Signaling), 1 channel, 6/8-bit, with a 40-pin connector
- Power Supply: 3.3V (Typical)
- Operating Environment: Operating Temperature: -20 to 70 °C; Storage Temperature: -30 to 80 °C
This panel is designed for industrial applications and features a PCAP touch panel for interactive use. It offers good brightness, contrast, and color support. The LVDS interface is used for data transmission, and the panel operates on a 3.3V power supply. The operating temperature range is -20 to 70 °C, and the storage temperature range is -30 to 80 °C.
