NL8060BC26-30D | 10.4" SVGA TFT-LCD for Rugged Industrial HMIs
Engineered for Operational Durability and Long-Term Reliability
Content last revised on October 13, 2025.
The NL8060BC26-30D is a 10.4-inch SVGA display engineered for sustained performance and visual clarity in harsh industrial and commercial environments. Leveraging a robust a-Si TFT-LCD panel, it delivers consistent operation across demanding thermal and mechanical conditions. Key specifications include: 800x600 SVGA | 400 cd/m² Brightness | -20°C to 70°C Operating Temp. This translates to exceptional environmental resilience and reduced long-term maintenance cycles. Its ruggedized construction directly ensures operational integrity in equipment subject to significant mechanical vibration. For industrial HMIs requiring proven SVGA resolution with a wide operating temperature range, the NL8060BC26-30D offers a benchmark for reliability.
Application Scenarios & Value
System-Level Benefits in High-Vibration and Thermally Demanding Environments
The NL8060BC26-30D is optimized for applications where consumer-grade displays would fail. Consider the design of a Human-Machine Interface (HMI) for a CNC milling machine or a control panel for packaging equipment on a factory floor. These environments are characterized by constant, low-amplitude vibration and significant temperature fluctuations. The NL8060BC26-30D's ability to operate flawlessly between -20°C and 70°C, combined with its 2.0G vibration resistance, directly addresses these engineering challenges. This resilience prevents intermittent failures, screen flickering, or physical damage, which are critical for maintaining machine uptime and operator productivity in industrial automation. What is the primary benefit of its long-life backlight? Reduced maintenance cycles and a lower total cost of ownership. For engineers developing systems for process control, transportation logistics, or test and measurement, this display provides a stable visual interface that enhances system-level dependability. While this model offers a robust solution for a wide range of applications, for systems with different resolution or interface requirements, the NL8060BC31-28E may present an alternative set of specifications for evaluation.
Key Parameter Overview
Decoding the Specifications for Long-Term Industrial Deployment
The technical specifications of the NL8060BC26-30D are tailored for integration into demanding industrial systems. The following parameters highlight its suitability for applications requiring durability and consistent visual performance.
| Feature | Specification |
|---|---|
| Display Size | 10.4 inches |
| Resolution | 800(RGB)×600 [SVGA] |
| Brightness | 400 cd/m² (Typ.) |
| Contrast Ratio | 1000:1 (Typ.) |
| Viewing Angle | 80/80/80/80 (Typ.)(CR≥10) |
| Interface Type | LVDS (1 ch, 6/8-bit), 20 pins Connector |
| Operating Temperature | -20 ~ 70 °C |
| Storage Temperature | -30 ~ 80 °C |
| Vibration Resistance | 2.0G (19.6 m/s²) |
| Backlight | CCFL, 50K hours (Typ.) |
For a comprehensive list of electrical characteristics, timing diagrams, and mechanical drawings, please refer to the official manufacturer's documentation.
Download the NL8060BC26-30D datasheet for detailed specifications and performance curves.
Industry Insights & Strategic Advantage
Strategic Advantages in the Evolution of Industrial HMIs
As industrial automation evolves, the demand for reliable and long-lasting components becomes paramount. The NL8060BC26-30D addresses this directly by focusing on a lower total cost of ownership (TCO) through durability. Its 50,000-hour rated CCFL backlight, for example, translates to over 5.7 years of continuous 24/7 operation, minimizing the need for costly maintenance and service calls in embedded systems. What defines the reliability of the NL8060BC26-30D? Its wide operating temperature range and high vibration resistance. This longevity is a critical consideration in an industry shifting towards "fit-and-forget" components that enhance overall system availability. Furthermore, the use of a standard LVDS Interface simplifies system integration and ensures high signal integrity, a crucial factor in electrically noisy industrial environments. The LVDS interface acts like a dedicated, noise-immune highway for video data. In a factory with high-power motors, this prevents the signal interference that could cause data errors or screen flicker, ensuring the HMI provides a stable and accurate representation of the machine's status.
Frequently Asked Questions
Engineering Clarifications on Durability and Integration
What is the engineering implication of the specified 2.0G vibration resistance?
This specification indicates that the module can withstand a constant acceleration of 2.0 times gravity (19.6 m/s²) without sustaining damage or operational failure. For system designers, this means the NL8060BC26-30D can be directly integrated into mobile machinery, portable test equipment, and systems located near motors or other sources of significant mechanical vibration without requiring complex and costly shock-absorbing mounts.
How does the 1000:1 contrast ratio benefit an industrial HMI application?
A high contrast ratio is critical for ensuring readability, especially for complex graphical user interfaces. It creates a clear distinction between blacks and whites, making text, numerical readouts, and status indicators (e.g., green for 'ON', red for 'FAULT') sharp and unambiguous. In a control panel environment, this level of clarity reduces the chance of operator error and improves the speed at which critical information can be processed, directly impacting both safety and efficiency.
