Tianma TM080JDHP95 LCD Display

Diagonal Size: 8.0 inches.

Panel Type: a-Si TFT-LCD (Amorphous Silicon Thin-Film Transistor Liquid Crystal Display), LCM (Liquid Crystal Module).

Resolution: 1280 (RGB)×720 pixels, WXGA (Wide Extended Graphics Array), with a pixel format of RGB Vertical Stripe.

Active Area: 176.64(W)×99.36(H) mm.

Bezel Opening: Not specified.

Outline Size: 192.8(W)×116.9(H) mm.

Surface: Not specified.

Brightness: 690 cd/m² (Typical).

Contrast Ratio: 900:1 (Typical).

Viewing Angle: 88/88/88/88 (Typical) for left, right, up, and down directions with a minimum contrast ratio of 10.

Display Mode: SFT (Super Fine TFT), Normally Black, Transmissive.

Best View on: Symmetry.

Response Time: 35 milliseconds (Typical) for Tr (Rise Time) + Td (Decay Time).

Display Colors: Supports 16.7 million colors with 73% NTSC color gamut coverage.

Lamp Type: 7S3P WLED (White Light Emitting Diode), with a lifespan of 30,000 hours, and it does not require a separate driver.

Frequency:

60Hz

120Hz (with embedded MEMC Circuit for 60Hz input)

120Hz + 120Hz (combination of 120Hz Panel and 120Hz Backlight)

240Hz (with embedded MEMC Circuit for 60Hz input)

Touch Screen: This panel does not have a built-in touch screen.

Panel Weight: Approximately 220 grams (Typical).

Application: Designed for outdoor high brightness automotive displays.

Signal Interface: LVDS (Low-Voltage Differential Signaling) with 1 channel and 8-bit color depth, using a 30-pin FPC (Flexible Printed Circuit) connector.

Input Voltage: 3.3V (Typical).

Operating Environment:

Operating Temperature: -30°C to 85°C

Storage Temperature: -45°C to 85°C

Vibration Level: 3.0G (29.4 m/s²)