Name: TX26D202VM0BAA
Brand: KOE
SKU: TX26D202VM0BAA
Price: 420 USD
Availability: InStock

Content last revised on September 26, 2025

The KOE P/NTX26D202VM0BAA LCD panel:

Diagonal Size: 10.1 inches.

Panel Type: Active-Matrix Thin-Film Transistor Liquid Crystal Display (a-Si TFT-LCD).

Resolution: 1920 x 1200 pixels, which is WUXGA (Wide Ultra Extended Graphics Array) resolution, providing a pixel density of 224 pixels per inch (PPI).

Pixel Format: RGB Vertical Stripe.

Active Area: The part of the screen that displays images measures 217.44 mm in width and 135.9 mm in height.

Bezel Opening: The opening in the device's frame for the screen is 219.44 mm in width and 137.90 mm in height.

Outline Dimensions: The physical dimensions of the panel are 232.1 mm in width, 153.2 mm in height, and 7.62 mm in depth.

Luminance: The typical brightness of the display is 800 cd/m² (candelas per square meter), indicating a high-brightness panel.

View Direction: This panel provides good viewing angles in a symmetric manner.

Viewing Angle: The typical viewing angles are 85 degrees in all directions (left, right, up, and down) when the contrast ratio is greater than or equal to 10.

Support Color: The panel supports 16.7 million colors, covering 55% of the NTSC color gamut.

Weight: The panel has a weight of 284 grams.

Frame Rate: The panel operates at a standard 60Hz refresh rate but can support higher refresh rates with embedded MEMC (Motion Estimation, Motion Compensation) circuitry.

Treatment: The surface treatment is not specified in the provided information.

Contrast Ratio: The typical contrast ratio is 800:1.

Response Time: The panel has a typical response time of 25 ms (Tr+Td).

Operating Mode: This panel uses an IPS (In-Plane Switching) mode, is normally black, and is transmissive.

Light Source: The backlight is a WLED (White Light Emitting Diode) with a rated lifespan of 40,000 hours. It comes with an integrated LED driver.

Designed For: This panel is designed for industrial outdoor applications with high brightness requirements.

Touch Panel: This panel does not have a touchscreen feature.

Interface Type: It uses LVDS (Low Voltage Differential Signaling) with a 2-channel, 8-bit configuration and is connected via a 50-pin connector.

Power Supply: The typical voltage supply for this panel is 3.3V.

Environment: The operating temperature range is -30 to 80°C, the storage temperature range is -30 to 80°C, and the vibration level is specified as 2.0G (19.6 m/s²).

KOE TX26D202VM0BAA

More from KOE

More from KOE